Page 1 of 1

Kemper Looper Control

Posted: Fri Sep 18, 2015 10:47 am
by smfelton
Hi everyone, I received my Soft Step 2 yesterday, so this is my first post on the forum, although i'm a regular on the Kemper forum.
Here is my first 'preset', it is to control the new looper on the Kemper Profiler. It is still work in process but works well. I've included a picture showing the functionality. The '6' led is red when recording, and green when playing. Press stop (7) three times and it deletes the loop.

Known Issues.
Keeping 6 held does not record, you must press once to start recording, and once to stop.
If you use trigger (9) to start play back you cannot stop with stop. You must press play (6) first, then stop.
Led's better operation- ie trigger lights playback led, see previous issue too.
Haven't implemented reverse and 1/2 speed yet.

Enjoy
Shane
http://www.alien-touch.com

KPA-Looper-v0.1.zip
(56.41 KiB) Downloaded 96 times

Re: Kemper Looper Control

Posted: Sat Sep 19, 2015 10:32 am
by smfelton
Updated version (v0.2), slightly improved performance.
Start and stop on Trigger implemented.
External expression pedal settings for Wah in "Nav pad"

KPA-Looper-v0.2.zip
(58.96 KiB) Downloaded 89 times

Re: Kemper Looper Control

Posted: Tue Oct 06, 2015 2:14 am
by smfelton
Updated v0.3
Fixes strange fault where occasionally there was a weird effect when the Wah was in full heel position.
Shane

KPA-Looper v0.3.softsteppreset.zip
(4.69 KiB) Downloaded 66 times