Rotary Location Limits

Share your wishes for the future of QuNeo
Posts: 9
Joined: Thu May 09, 2013 11:34 am

Rotary Location Limits

Postby arrjaytea » Tue May 14, 2013 1:52 pm

I'd like to be able to assign the starting and ending location of rotary knobs, as well as the total amount of the rotary area used (i.e. 80% with a 20% dead spot to avoid quickly going from max to min).
Posts: 92
Joined: Mon Jan 02, 2012 7:49 am

Re: Rotary Location Limits

Postby kazakore » Sat Jun 01, 2013 9:10 am

I already find it weird they seem to be upside-down compared to pretty much any other controller! (Zero/max is at 12 o'clock right? Or am I remembering wrong/this has been changed in the latest update I'm still to download?)

How would you envision this working. Start Position - 0-127 starting from 12 o'clock. Usable Angle - 0-100%. Something like that??
Posts: 97
Joined: Thu Jun 16, 2011 11:24 am

Re: Rotary Location Limits

Postby demcanulty » Fri Jul 19, 2013 12:25 am

127 going to 0 is at 12 going to 0:01, in other words, they mirror a clock. It's been hammered home at me that most people think of a knob with 0 at 6 o'clock and 127 at 5:59 o'clock. This was kind of a dumb oversight, I am hoping to fix it with an option to flip the rotary for those who require it. Early on, I imagined the rotary as serving people like a rotary encoder would, with them encoding the necessary transposition to their own coordinates, but I believe now that this is asking too much of users. People should be able to get a 0-127 in an inverse clock form without any struggle, as most programs don't support remapping rotary encoders.
Posts: 23
Joined: Fri Jun 14, 2013 6:21 am

Re: Rotary Location Limits

Postby Jackenite » Mon Nov 04, 2013 9:24 pm

+1 to inverting to rotories, so their not just big buttons.
+1 to Finite rotation as well.

Return to “QuNeo Feature Wishlist”

Who is online

Users browsing this forum: No registered users and 1 guest