I'm hoping that someone can help me solve a situation that I'm in regarding midi program change on the 12 step.
I am running the 12step into a roland soniccell sound module (via the kmi expander).
I wish to send program change messages from the 12step to the soniccell, so that the soniccell patch will change when I change the preset on the 12step.
To select the user patch bank in the sonicell, I need the 12step to output CC#0 87 and CC#32 0, followed by PC x (x = patch number). See page 223 of the sonnicell manual (http://roland.com/support/article/?q=ma ... id=1810906)
According to the 12step manual, the CC#0 value (MSB) is fixed at 0 and cannot be changed is this true? Is there some way that I can change this?
ALSO, the soniccell WILL accept CC#0 = 0 if I am trying to reference the GM patches instead of the user patches. But even when I try this, I can get the program change function in the 12step to work, but the bank change (LSB/CC#32) doesn't seem to work at all - it also appears to be stuck at zero? - If you look at page 231 of the soniccell manual, I can use the PC in the 12step to cycle through GM1/4/6/8 etc, but I can't get the LSB to change (for example) between GM1/2/3 with PC=1?
I hope that makes sense, I have some midi knowledge but I am not any expert by any means.
Thanks in advance.