I took the K-mix back. It's got far too many things about it that are quirky and do not make much sense. I spent two days emailing tech support back and forth and while they were as helpful as they could be, they could not solve the problem. So, good luck Keith Mcmillen, I hope you guys improve your...

Take a look here at the trim knobs for channels 1 and 2. They go to 1.50 DB on the lowest possible setting. 1.JPG While channels 3-8 go to -18.50 3.JPG Why wouldn't channels 1 and 2 to go to -inf DB or -18.50 like the rest of the trim knobs. This is the problem. I can hear my mic in channel 1 and gu...

Note: You need to check several cables. I do not know why, maybe a tech can explain, but certain usb cables that I tried with K-mix will not allow me to adjust the sample rate to 44.1 KHZ One was stuck at 96KHZ. Another cable did not work at all (The one supplied with K-mix) So you might have to buy...

Hi, I understand that I can click the headphone button and adjust my headphone volume there. Is there a way to link the master out with the headphones out? So that if I am on main mode I can adjust the main output and it will also adjust my headphones out as well?

Okay, I was really taken aback by this feature. I was trying to listen to my scuffam amps standalone plugin with the guitar. On my channel strip I have all faders turned down and the trim is at the lowest possible setting (which should be 0 but it is 1.50?) So, I was scratching my head trying to fig...

Is there a way to be able to sample with loopback? I do not see that feature. I have maschine and I would like to sample sounds that are playing from my computer or from youtube, etc. If not, is there a way you guys could implement this feature? Thank you

I just found an explanation in the manual on page 137 in the manual

I am curious as to why in the USB audio control panel under the buffer settings, I am getting warnings for example 64 Buffers I do not get the warning on Minimum latency settings 64 samples min latency.JPG However on Low latency setting and everything above I get the warning 64 samples low latency.J...

3.JPG 2.JPG If you see this warning then mess with the buffer settings for instance I have 64 samples on minimum latency and I do not see that warning. You basically have to tweak this until you do not see that warning sign. 8. Go to k-mix editor and go to USB and use pre for channels 1-8 and post ...

1st. Download and install the driver (if your cable does not work try another USB 2.0 cable, I had issues with the supplied cable and the K-mix was not recognized. I am only using bus powered, no power adapter 2. Go to sound properties in windows and right click on the speaker and click sounds sound...