Help! X/Y CC# in presets (Reason 10, QuNeo Editor)

savvyjake
Posts: 3
Joined: Thu Jun 11, 2015 4:46 pm

Help! X/Y CC# in presets (Reason 10, QuNeo Editor)

Postby savvyjake » Sun Feb 04, 2018 3:24 pm

Hi forum! I could use a little help getting a custom preset to work - any suggestions? Thanks in advance!

I'm making a custom preset for Reason 10, based on a copy of the default Reason preset - I'm including a screenshot of the preset here, but it's pretty simple (or so I thought...) I want the drum pads to each send a regular note, starting in middle C, with pressure, X and Y for every pad sending their own CC #s. That way I can use Remote Override Edit Mode to assign each pad's note, pressure and X/Y wherever I want them. I could, for example, tap the pad to play a synth note, then hold the pad down and use pressure and X/Y to control filters, delays, pitch, LFO, or whatever else I wanted to assign. I started assigning CC#s at 127 and worked down from there, since I wanted to keep some of the original Reason defaults, which are assigned from 1-38 for the vertical and horizontal faders.

The Problem: Note and pressure assignments are both working fine, exactly how it looks in the preset screenshot I attached, but the X/Y messages aren't recognized in reason. When have the QuNeo in CoMA mode, and Reason in Remote Override Edit Mode, I can assign the notes and pressures to anything I want, but I can't get the X/Y messages to do anything. I select the knob in Reason I want to control (the little lightning bolt is spinning) and press the lower left or lower right corners on the QuNeo (in CoMA Mode and Drum Mode) nothing happens.

Am I using CoMA mode wrong? Am I using Remote Override Edit Mode wrong? Am I assigning CC#s wrong? I've always had great luck using Remote Override Edit Mode to assign knobs, faders and buttons with other controllers (like an Axiom 49 and a Roland FCB 1010) but this time I'm just stumped.
Attachments
Screen shot of the QuNeo Editor preset
Screen shot of the QuNeo Editor preset

Return to “QuNeo General Discussion”

Who is online

Users browsing this forum: No registered users and 5 guests

cron