Due to inactivity, the KMI Forums are now READ ONLY.
Here are some helpful links you can visit to get more up to date information about your KMI products:

KMI Downloads
KMI Support
KMI Facebook User Group

Document the SysEx messages

Share your wishes for the future of QuNeo
User avatar
slinky
Posts: 20
Joined: Wed Sep 12, 2012 11:32 am

Document the SysEx messages

Postby slinky » Tue Sep 18, 2012 10:11 am

Please!

E.g. what does this mean:
F0 00 01 5F 7A 1E 00 01 00 02 30 09 7E 1C 00 00 F7
TheSupport@KMI
Posts: 726
Joined: Wed Jul 13, 2011 12:30 pm

Re: Document the SysEx messages

Postby TheSupport@KMI » Tue Sep 18, 2012 2:10 pm

Which SysEx messages are you referring to exactly?
2, 3, 5, 13, 89, 233, 1597, 28657, 514229, 433494437, 2971215073
User avatar
slinky
Posts: 20
Joined: Wed Sep 12, 2012 11:32 am

Re: Document the SysEx messages

Postby slinky » Wed Sep 19, 2012 9:32 am

SupportzKMI wrote:Which SysEx messages are you referring to exactly?
Well, what I'm after is some way to modify the pads, sliders, buttons, etc. without using the Windows/OSX programs. I.e. some way to configure the note, pressure, sensitivity, x, y, x/y return and so on.

I presume the programs just send SysEx messages to modify the preset data stored on the device.

Perhaps this is not the case - how does the preset editor then communicate the new values?
runtoo75
Posts: 1
Joined: Tue Dec 23, 2014 1:25 am

Re: Document the SysEx messages

Postby runtoo75 » Tue Dec 23, 2014 1:40 am

is there going to be any sort of Max6 SDK or template to use allowing easy mapping of sensor values, I know you guys are pretty nifty Max users and just wondered if there were plans for this. I find this a valuable tool when using my Softstep with Max and this would be great with the QuNeo too.
You can check out our latest 70-640 - vce exams and 300-207 - actual tests - braindumps.com exams written by our pba to help you pass www.kumc.edu You can also purchase Florida Southern College
User avatar
jscott
Posts: 42
Joined: Thu Nov 08, 2012 2:52 pm

Re: Document the SysEx messages

Postby jscott » Thu Dec 25, 2014 8:59 am

slinky wrote:Please!

E.g. what does this mean:
F0 00 01 5F 7A 1E 00 01 00 02 30 09 7E 1C 00 00 F7
The message "F0 00 01 5F 7A 1E 00 01 00 02 30 09 7E 1C 00 00 F7" means load preset #10.

The documented sysex messages so far are load presets 1-16, tether mode on, tether mode off, and LED toggle.

All of these start with "F0 00 01 5F 7A 1E 00 01 00 02" so that is something of a header.

Fields seem likely to include actually memory addresses in the firmware that are targeted for writing, so it is possible there is not a consistent mapping between firmware versions as new fields are added, and thus documenting everything would be problematic.

Detailed patch data seems to be writable only in bulk, as a complete patch.

Plus a small number of global parameters such as patch select and tether mode, as mentioned. It seems these global parameters can be presumed to remain constant across firmware releases.

Return to “QuNeo Feature Wishlist”

Who is online

Users browsing this forum: No registered users and 6 guests