Due to inactivity, the KMI Forums are now READ ONLY.
Here are some helpful links you can visit to get more up to date information about your KMI products:

KMI Downloads
KMI Support
KMI Facebook User Group

QuNeo Max/MSP Dev Kit Available Now

a place to share your QuNeo Scenes and Presets
TheSupport@KMI
Posts: 726
Joined: Wed Jul 13, 2011 12:30 pm

QuNeo Max/MSP Dev Kit Available Now

Postby TheSupport@KMI » Wed Apr 03, 2013 5:29 pm

Check out the post here: viewtopic.php?f=49&t=1014
2, 3, 5, 13, 89, 233, 1597, 28657, 514229, 433494437, 2971215073
dothque
Posts: 4
Joined: Fri May 09, 2014 10:33 pm

Re: QuNeo Max/MSP Dev Kit Available Now

Postby dothque » Fri May 09, 2014 10:58 pm

Hello,

I get wrong functioning with this Dev Kit.
The sliders info is showing in the Pads.
the example with @ pad 2 showing the sliders as the X/Ys values.

I guess that there is a mismatch beאween the notes .
any suggestions?
emmett@KMI
Posts: 121
Joined: Tue Apr 29, 2014 1:00 pm

Re: QuNeo Max/MSP Dev Kit Available Now

Postby emmett@KMI » Mon May 12, 2014 2:56 pm

Are you putting your QuNeo into tethered mode?
dothque
Posts: 4
Joined: Fri May 09, 2014 10:33 pm

Re: QuNeo Max/MSP Dev Kit Available Now

Postby dothque » Tue May 13, 2014 6:10 am

I tried to use that option but still no luck.

In the Patch i see that the Sliders should be on Channel 3 and the buttons on 4.
in the Quneo editors all in CH.1

the Vertical Sliders CC are 3 - 6.
this explains why the move the Pad 2 X Y values.
setting Pad 2 X and Y to 4 gives a better result but still need to fine tune it.

I will play around again with the tethered mode.
Any steps needs to be taken prior to that?

Thanks for your reply!
emmett@KMI
Posts: 121
Joined: Tue Apr 29, 2014 1:00 pm

Re: QuNeo Max/MSP Dev Kit Available Now

Postby emmett@KMI » Tue May 13, 2014 12:03 pm

It sounds like you're not properly in tethered mode. This dev kit is made to handle the raw data so you should be seeing 16 CCs per slider.
dothque
Posts: 4
Joined: Fri May 09, 2014 10:33 pm

Re: QuNeo Max/MSP Dev Kit Available Now

Postby dothque » Wed May 14, 2014 1:36 am

Hi,
The guy that uploaded the Patch told me the exact same thing.
So I guess that is the solution.

Thanks for advising.
dothque
Posts: 4
Joined: Fri May 09, 2014 10:33 pm

Re: QuNeo Max/MSP Dev Kit Available Now

Postby dothque » Wed May 21, 2014 4:14 am

Hi,
Today I have finally got it, in tethered mode the pads locations are inverted.
so pad number two becomes pad number 14.

now I wonder if it is possible to turn on the LEDS as well?

Thanks for the tips :)

Return to “QuNeo Preset Sharing Forum”

Who is online

Users browsing this forum: No registered users and 4 guests