Due to inactivity, the KMI Forums are now READ ONLY.
Here are some helpful links you can visit to get more up to date information about your KMI products:

KMI Downloads
KMI Support
KMI Facebook User Group

Enter Debug/Tethered Mode (sensors -> CC) reliably with MaxMSP or SuperCollider

Show off your QuNexus tricks here
Posts: 4
Joined: Sat Dec 06, 2014 12:04 pm

Enter Debug/Tethered Mode (sensors -> CC) reliably with MaxMSP or SuperCollider

Postby 3rdtry » Sat Feb 13, 2016 12:24 pm


I found out how to get in to the tethered mode reliably!

The mode makes the QuNexus put out all sensors as CC messages.

For supercollider:

Code: Select all

MIDIOut.newByName("QuNexus","QuNexus").sysex(Int8Array[16rF0,16r00,16r01,16r5F,16r7A,16r19,16r00,16r01,16r00,16r02,16r40,16r01,16r77,16r4D,16r00,16r10,16r10,16rF7]); // TO TEEETHERED MODE
MIDIOut.newByName("QuNexus","QuNexus").sysex(Int8Array[16rF0,16r00,16r01,16r5F,16r7A,16r19,16r00,16r01,16r00,16r02,16r40,16r00,16r67,16r6C,16r00,16r10,16r10,16rF7]); // OUT OF TEETHERED MODE
For Max:
The dirty trick to make it work, is to tell the QuNexus to enter tethered mode twice! This was not possible with the original Max patch I found.

I attached a modified version:
- select QuNexus in the midi list
- hit the button of the desired mode TWICE
- (you should see the lights go off or on and the note or the cc messages in the console)

edit: for the max version: maybe the sysex shouldn't start with 0, but with the 240. Would make sense, have no max to try right now.
(1.49 KiB) Downloaded 333 times

Return to “QuNexus Tips and Tricks”

Who is online

Users browsing this forum: No registered users and 4 guests