I made some changes on the livid base remote script from amounra, to use it with the qunexus:
it's for live 9.1.4 & later
1 folder to copy to the MIDI remote scripts folder,
and a preset file for the qunexus editor
it uses the channel 9 & 10 so you can change of preset on the fly, to play usual keyboard
https://app.box.com/s/omimc9tel6jtn5tnwko5lzeld4qivb8b
some tools comes from the ableton push (loop selection, note repeat,...) so you can look at the manual for professional explanation
clip mode :
delete clip button triggers the previous clip,
duplicate clip button triggers the new duplicated clip
same for delete/duplicate scene and track modes(duplicate scene is the capture and insert scene function)
hold shift to get track mode:
selecting a track will automatically selects the playing clip on it
selecting a group track will unfold/fold it and fold other group tracks in the set
beat repeat :
it needs a beat repeat effect on the track (or the Max Reverser from http://www.maxforlive.com/library/device/130/reverser): the qunexus will control it
same behaviour as note repeat
loop mode :
press&hold a pad and press another one to set a loop range
press a pad outside the loop will set a loop range of 1 step,
or double press a pad inside the loop to set a loop in it.
simple press inside the loop selects the page, it will then unfollow the playhead.
reselect the loop range to follow on
start marker : hold the shift button and press a step
jump step jumps 1 step back (so it's depends of the step size),
hold it to repeatedly jump (but that's not strictly precise, tilt the button to adjust)
automation mode:
if you have another controller that controls devices (blue hand): press&hold some step & tweak a knob
or select a device parameter with the mouse & tilt
step sequencer:
simplepress mutes the note, doublepress to delete (there is aspecial button to delete all the muted notes)
hold a step (one blink) to select the note
note velocity : hold a step and tilt
note lenght : hold a step and then select another step on the right to set the lenght
duplicate button duplicates the selected page & the notes inside
hold move page button to follow the playhead
monoseq :
all the notes on the same line
select one note selects the pitch
key mode:
it will not select the note for the sequencer(except for drumrack)
note repeat :
works with the grid(the grid repeat appears when pressing the repeat button)
a quick press&release latches the repeat, or hold it to momentary repeat
pressure controls the velocity
tilt the grid to adjust swing (live will show the value)
to not get lost, I just suggest to put 2 soft sticky markers on the bottom row from pad 4 to 8 and 12 to 15(as on the picture)
I just hope that the McMillen staff will update the firmware, to have the possibility to direct change of preset(and not shit + preset),
and the other possibility to use the left buttons as midi message, to put the switch mode button of that script on the shift/preset button (and octave too)
but the same hardware with colored pads(to get track's label, & a better navigation), and the 16th pad on a straight line, would be just perfect
mixer & device remote script:
https://forum.ableton.com/viewtopic.php ... 3#p1633173