CV gate out on 2 or 3

[an3]

i only have synths with gate in, unfort. only one of the cv outs has gate. could this please be an option to program on cv out 2 or 3

or is there a trick ?

[TheSupport@KMI]

The gate has different hardware than the other CV outs, so I don't believe it's possible to turn others into gates.

[an3]

. ok could u duplicate the gate cv port (for example with a splitter)?

[hageir]

. ok could u duplicate the gate cv port (for example with a splitter)?

This is in fact possible.
On the Kenton website there's a tip for controlling a synth with double inputs (like the Yamaha CS-15/CS-30)
I had a Kenton Pro-4 once and I ran two pairs of outputs to the CS-15, then I found out about the splitter.

But the thing is, if you have two different synths, you'll get the same gate.
Assigning CV-3 & CV-4 to another channel along with the (request) option to use one as a gate would be awesome!

[an3]

do u have the link of that specific kenton page