Due to inactivity, the KMI Forums are now READ ONLY.
Here are some helpful links you can visit to get more up to date information about your KMI products:

KMI Downloads
KMI Support
KMI Facebook User Group

max/msp

Share your wishes for the future of QuNexus
mattebass
Posts: 8
Joined: Fri Feb 08, 2013 12:25 am

max/msp

Postby mattebass » Tue Jul 08, 2014 9:09 am

Hello,
I'd like to know if there's a max sdk for QuNexus as like as for other products
thanks

Matteo
TheOtherSupport@KMI
Posts: 737
Joined: Fri Jan 31, 2014 5:31 pm

Re: max/msp

Postby TheOtherSupport@KMI » Tue Jul 08, 2014 9:18 am

There isn't an SDK, but there is a way that you can output the raw sensor data. It requires sending a few sysex commands, but it's not hard to set up. Let me know if you're interested and I'll throw a little patch together to get you started.
mattebass
Posts: 8
Joined: Fri Feb 08, 2013 12:25 am

Re: max/msp

Postby mattebass » Tue Jul 08, 2014 11:12 am

Thanks, It would be great
TheOtherSupport@KMI
Posts: 737
Joined: Fri Jan 31, 2014 5:31 pm

Re: max/msp

Postby TheOtherSupport@KMI » Tue Jul 08, 2014 12:00 pm

I've attached a simple patch, just select QuNexus port 1 from the menu, and use the toggle to switch between normal and tethered(raw output).

Let me know if you have any more questions!

Edit: Whoops! needed to zip it before the forum would accept the attachment.
Attachments
QuNexus_Tethered.maxpat.zip
(1.89 KiB) Downloaded 647 times
mattebass
Posts: 8
Joined: Fri Feb 08, 2013 12:25 am

Re: max/msp

Postby mattebass » Tue Jul 08, 2014 12:06 pm

I'm sorry, but I can't find the attachment
TheOtherSupport@KMI
Posts: 737
Joined: Fri Jan 31, 2014 5:31 pm

Re: max/msp

Postby TheOtherSupport@KMI » Tue Jul 08, 2014 12:10 pm

Corrected.
mattebass
Posts: 8
Joined: Fri Feb 08, 2013 12:25 am

Re: max/msp

Postby mattebass » Tue Jul 08, 2014 12:17 pm

thank you very much
3rdtry
Posts: 4
Joined: Sat Dec 06, 2014 12:04 pm

Re: max/msp

Postby 3rdtry » Sat Dec 06, 2014 12:23 pm

I successfully see some CC messages with factory preset D, but no change when i toggle between tethered and normal. What did I do wrong?
Is there any way of debugging? should there come back a sysex message or should any led blink?
maybe the firmware changed? could I roll back than?


I'd really love to have this.
I bought the qunexus for absolute tilt values in the first place...
if not a solution, a diagnosis wold be appreciated too, just so I don't throw more time at this problem :)
mehak
Posts: 1
Joined: Sun Jan 11, 2015 11:15 pm

Re: max/msp

Postby mehak » Sun Jan 11, 2015 11:19 pm

It would be possible to change the LEDs wrapping (it actually makes programming the LED's a pain, especially because if you shift up one octave, the external control will be lighting the wrong octave) in a firmware update.
___________________
Usman

Return to “QuNexus Feature Wishlist”

Who is online

Users browsing this forum: No registered users and 1 guest