Set up:
- Start with BopPad freshly powered up.
- Set up something to monitor CC values from the BopPad.
- Start the BopPad web editor.
- Select Universal from the preset menu.
- Run your finger radially on quadrant A.
- Observe that the CC values go smoothly from 1 to 127 and back.
- Edit the gain value to 0.5 on the radius mod-line.
- Run your finger radially on quadrant A.
- Observe that the CC values go smoothly from 1 to 63 and back.
- Click "save-as", and save the preset as something like "univ-radius-half"
- Select Universal from the preset menu, again.
- Run your finger radially on quadrant A.
- Observe that the CC values go smoothly from 1 to 127 and back.
- Select "univ-radius-half" from the preset menu.
- Run your finger radially on quadrant A.
- Observe that the CC values jitter between 1 and 36, and not related to where on the pad your finger is.
- Select Universal from the preset menu, a third time.
- Run your finger radially on quadrant A.
- Observe that the CC values are still broken.
Of course, this make the gain feature almost useless, because the only way to use it is to edit it live, but never ever send a preset with it.